Dillon XL 650 Live/Spent Primer Combo Upgrade

(for Older Version Presses Only)

$24.99

I've been selling my Primer Upgrades for years which solves the problem of primers all over the floor.... but they only fit the newer style presses. That is until now... for those of you who haven't converted to the newer style platform I now have come up with a fix you too. This upgrade will replace the original plastic combination missed primer chute / spent primer cup bracket with and all in one Catcher Assembly that will handle both missed live primers as well as your spent primers too. Just like my other upgrades the missed primers are collected into a small reservoir bottle while the spent primers are feed down through a hose into a soda bottle (not supplied) or other suitable container.

This upgrade creates a closed primer system for both Live and Spent primers so there is no way for primers to exit the system and end up on the floor. When properly mounted this upgrade will not affect the operation of the press in anyway and it will work with either size primers.

These parts are now printed on a 3D printer, which allows for a much cleaner finish on the prominent side (no more mold seam line), it also has a tighter tolerance for the bottles threads. If you are not happy for any reason with this item I will give you a full refund. Keep in mind I am a one man show so unlike my other upgrades quantities on these may be limited at times... so get them while they are available. :)

Upgrade Press Compatibility

This upgrade will ONLY fit the OLDER Dillon XL650's with the combination plastic primer chute/spent primer cup bracket shown above. (the cup is not shown here.) If your press is not at least 15+ years old this is probably not the upgrade for you.

This will NOT FIT the Newer Presses that have the Plastic Primer Chute and the separate Metal Spent Primer Cup Bracket.

Your platform must also have the step shown in the Left Picture (see red arrow) for this upgrade to fit.

If your platform is flush like the right image shows this upgrade will not fit your press. I can make a special one to fit the flush style platforms but you must email me before ordering.

If you are still unsure if this upgrade will fit your press just email me a picture of the bottom of your plateform and I will let you know which upgrade you need.

Upgrade Includes

          • Printed Plastic Primer Catcher Combo Assembly
          • Plastic Primer Reservoir Bottle
          • 4' of Hose
          • Bottom Hose Fitting & Zip Ties
          • Pre-drilled Soda Bottle Cap (cap colors may vary, usually white)
          • Instructions are downloadable as a PDF <--click to preview

(To save Instructions Right Click the above link and click "Save Link As")

Dillon XL 650 Live/Spent Primer Combo Upgrade

(for Older Version Presses Only)

$24.99