Square Deal 'B' Bullet ArkoBin

Bracket Installation Instructions.

Please read through all of the steps before beginning.

Your Bullet ArkoBin Bracket Upgrade will mount to the top right side holes shown above .

......

Using a 7/16" wrench and a 5/32 Allen Wrench mount the ABS Bracket to your strong mount using the included hardware. Do not over tighten the screws they just need to be snug.

Next just mount the bin bracket arm into the mount and using the supplied screw and nut. Tighten the screw with a 5/64" Allen. Again being careful not to over tighten the screw.

Now just hang your bin on the bracket, fill it up with some bullets and you are ready to load.

While the bracket can support good amount of weight (the last picture shows approximately (4Lbs.) 250 rounds of 9mm bullets loaded) if you try to overload the bin you may over stress your ArkoBin. If you see white creases forming in the corners this is a good sign you are overloading the bin.

Another thing you can do to make loading easier is to hang another AkroBin off the side of the finished round bin to hold your brass. This puts all the components in reach for easy loading into the press. (Just be careful as this is not as secure as the other Bin Brackets.)

Enjoy the Loading... If you have any questions, comments, or problems please contact me at stevethone@comcast.net

© Steve Thone 2016